四网合一光纤配线箱 楼道壁挂式）

四网合一光纤配线箱（电信网、移动网、联通网、广电网）

【特汇通信愿为您提供优质的产品，良好的的服务！愿与您共同打造通信行业的未来。感谢您对特汇通信的信任和支持。谢谢您的参与。】

四网合一分纤箱|四网合一配线箱|四网合一楼道箱|四网合一分光箱|四网合一分配箱|四网合一光纤分纤箱|四网合一光纤配线箱|四网合一光纤分光箱|四网合一光纤分配箱|四网合一光纤楼道箱|四网合一光分路器箱|四网合一箱

产品容量：12芯、24芯、36芯、48芯、72芯、96芯、108芯、144芯

四网合一光缆分纤箱是FTTH系统中用户终端的配线分线设备，是一种用来对光缆、光纤进行终接、分歧、配线、分光；并提供对光纤光缆保护及管理的设备。 其主要用于FTTH-ODN网络的用户接入点，按其安装场景，可分为室内和室外型，按其功能又可分为配线型和分光型。
特汇四网合一分纤箱满足YD/T2150-2010、GB/T2423-2008、GB/T3873-1998、GB/T9286-1998等国内标准及IEC 61300-3-15、 IEC 61300-3-16 、IEC 61300-3-17 、IEC 61300-3-23等国际标准
特汇FTTX布线应有尽有、质量保证！随时欢迎您前来咨询！！！ 
特汇一贯坚持“企业以人为本，人以责任为先” 的发展理念，高标准、零缺陷、顾客的期望是我们追求的目标。 完善自我、追赶自我、为客户创造更多价值是企业宗旨，创新、团结、敬业、守信是公司精神，用“心”突破传统，用“光”**未来， 公司将锲而不舍、持之以恒地走创新发展之路，与社会各界朋友及客户、合作伙伴共同建设“宽带中国”的美好明天!

四网合一光纤分纤箱（Four net fiber optic fiber division box）
FTTH室内外壁挂式光分路器箱用于光缆与光通信设备的配线连接，通过配线箱内的适配器，用光纤跳线引出光信号，实现光配线功能。适用于FTTH工程光缆到楼后使用，安装于楼道、地下室、机房和大楼外墙。光缆也可以经
分光配线箱开拨盘绕后与入户光缆熔接引出，实现光缆的直通功能，满足传统传输网络工程的需求。
一、主要特点：
1.有效做到移动、联通、电信、广电四网合一。大大节省了施工空间和施工强度；
2.箱体采用冷轧板制成，经静电喷塑处理，美观大方，线条清晰，防腐防水性能好，使用寿命长；
3.光分路器模块采用抽屉式模块化设计，具有很强的互换性和通用性；
4.采取左右结构和上下结构组合结构的设计,左右两边都有光纤熔接层,而右边上层为光分路器配线层,下层为光纤熔接层；
5.在机箱形式及厚度保持一致的情况下，光纤熔接盘*大支持6片，满足施工过程中任意形式的接续；
6.各种接头端接方便，安装灵活。用于配线间和设备间光缆的端接、使用和管理；
7.门锁采用优质户外防水锁，箱体挂墙安装；
8.具有临时尾纤存储区域；
9.支持各种光纤连接头的管理，如SC、LC、ST、MT-RJ等。
二、技术参数：
1.工作温度：-30~+60度，储存温度-40~+60度
2.箱门开启角度：180°
3.大气压力:70Kpa-106Kpa
4.光电性能:插入损耗≤0.2dB;附加损耗≤0.2B
5.回波损耗≥45dB;附加损耗≤5dB
6.插拔耐久性寿命>1000次
7.电气性能:绝缘电阻≥1000MΩ500V(直流电)
8.抗电强度:能承受3000V(直流电)/1min无击穿/无飞弧现象
三、适用性指标:
1.标称工作波长850nm\1310nm\1550nm;
2.光纤光缆符合GB/T11819和GB/T7424规范;
3.光纤活动连接器符合GB12507以及相关标准规范；
4.前面操作、安装都相当迅速方便；
5.分路器插座板可翻转，蝶形光缆可以实现存储，方便维护及光缆多次维护；
6.配置2个标准插片式分光器安装槽位，可安装2台1：4/1：8插片式分光器；
7.产品重量：壁挂式：22KG 、镶嵌式：21KG
8.产品材料：冷轧板
9.产品颜色：常规色灰色
10.产品工艺：冲压
GPX03-VIIII型光分路箱（四运营商共用-弱电井墙挂式）
一、产品组成
光分路箱（四运营商共用-弱电井墙挂式）由箱体、内部结构件、光纤熔接盘片、 光分插片及附件组成。
二、产品尺寸：高×宽×深=800mm×600mm×120mm（160mm）
三、.配置：
1、每个功能仓有2个上联光缆进箱孔。
2、每个功能仓至少有1个皮线光缆出箱孔。
3、每个功能仓2套光缆固缆接地装置。
4、可容纳二个1:4、1:8或一个2:16的光分路器插片的光分路器插片盒。
5、光分路器进端口光缆储存装置。
6、皮线光缆收容及绑扎装置。
7、可翻转的光分路成端及调度装置。
四、特点： 采用模块化、无跳纤结构，壁挂式安装。可通过灵活的增加插片式光分路器的
数量，以实现端口的扩容。另配置光纤熔接盘片用于上联光缆的端接及光缆分支的接续，并配置储纤用适配器，用于上联光缆的储存与固定。
箱体材质采用优质冷轧板（Q235-A）制成，箱体表面采用环氧静电喷塑，具有耐腐蚀、耐老化；
有效做到移动、联通、电信、广电四网合一。大大节省了施工空间和施工强度。
采取左右结构和上下结构组合结构的设计，左右两边都有光纤熔接层,而右边上层为光分路器配线层，下层为光纤熔接层。
在机箱形式及厚度保持一致的情况下，光纤熔接盘大支持6片，满足施工过程中任意形式的接续
塑件部分采用阻燃ABS材质部件；
双层结构设计，上层为光分路器配线层，下层为光纤熔接层；
光分路器模块采用抽屉式模块设计，具有很强的互换性和通用性；
采用翻板式结构，能高密度的配置端口和分光设施。
符合YD/T 778-2006《光缆分纤箱》Q/CT 2354-2011《光缆分纤箱技术要求》
产品应用：
适用于FTTH工程光缆到楼后使用，安装于楼道、地下室、机房和大楼外墙。光缆也可以经分光配线箱开拨盘绕后与入户光缆熔接引出，实现光缆的直通功能，满足传统传输网络工程的需求；
Four net fiber optic fiber division box
The FTTH indoor and external wall hanging optical divider box is used for the wiring connection of optical fiber cable and optical communication equipment. Through the adapter in the wiring box, the optical ** is extracted with the optical fiber jump line to realize the function of the optical wiring. Suitable for use in the FTTH cable to the engineering building, installed in the corridor, basement, room and building facades. Fiber optic cable can also be passed through
The split wiring box is opened and coiled and connected with the household optical cable to achieve the direct connection function of the optical cable to meet the needs of traditional transmission network engineering.
1. The main features:
1., effective integration of mobile Internet, Unicom, telecom and radio and TV four networks. The construction space and construction strength are greatly saved.
The 2. box is made of cold rolled sheet. It is processed by electrostatic spraying. It has beautiful appearance, clear line, good corrosion and waterproof performance and long service life.
3., optical distributor module adopts drawer module design, which has strong interchangeability and versatility.
4. with the design of the left and right structures and the combined structure of the upper and lower structures, there are optical fiber splicing layers on both sides, while the upper right upper layer is the wiring layer of the optical splitter and the lower layer is the fiber splicing layer.
5., when the form and thickness of the chassis are consistent, the optical fiber splice tray supports 6 pieces to meet any connection in the construction process.
6. all kinds of joints are easy to connect, and the installation is flexible. It is used for terminating, using and managing optical cable between wiring rooms and equipments.
7., the door locks are equipped with high quality outdoor waterproof locks, and box walls are installed.
8. temporary storage area with pigtail;
9., support all kinds of optical fiber connector management, such as SC, LC, ST, MT-RJ and so on.
Two. Technical parameters:
1. working temperature: -30~+60 degree, storage temperature -40~+60 degree.
2. box door opening angle: 180 degrees
3. atmospheric pressure: 70Kpa-106Kpa
4. photoelectric properties: insertion loss is less than 0.2dB; the additional loss is less than 0.2B
5. return loss is greater than or equal to 45dB; the additional loss is less than 5dB
6. pluggable durability life >1000 times
7. electrical performance: insulation resistance is more than 1000M Omega 500V (DC)
8., anti electric strength: it can withstand 3000V (DC) /1min no breakdown / no arcing phenomenon.
Three. Applicability index:
1. the nominal working wavelength 850nm\1310nm\1550nm;
2. fiber optic cable conforms to GB/T11819 and GB/T7424 specifications.
3. optical fiber connector is in line with GB12507 and related standards.
The operation and installation of the 4. front are quite quick and convenient.
The 5. branch outlet can flip, butterfly optical cable can store, facilitate maintenance and optical cable maintenance for many times.
6., 2 standard plug-in splitter mounting slots are allocated, and 2 1:4/1:8 plug-in splitter can be installed.
7. product weight: wall mounted: 22KG, mosaic: 21KG.
8. product material: cold rolled plate
9. product color: conventional color grey
10. product process: stamping
GPX03-VIIII type light split box (shared by four operators, weak electric well wall hanging).
1. Product composition
The light split box (four operator common weak electric well wall hanging type) is composed of a box, an internal structural part, an optical fiber fusion disc, an optical patch and accessories.
Two, product size: high * wide * Deep =800mm * 600mm * 120mm (160mm).
Three. Configuration:
1, each function has 2 positions on the cable box into the hole.
2, the function of each bin has at least 1 indoor cable out of the box hole.
3. 2 sets of cable fixed cable grounding devices for each functional warehouse.
Optical splitter 4, can accommodate two 1:4, 1:8 or a 2:16 splitter inserted inserted.
5, optical splitter into the port optical cable storage device.
6, indoor cable accommodating and binding device.
7. A flip end and a scheduling device that can be turned over.
Four, features: modular, no jump fiber structure, wall mounted installation. A flexible splitter can be added flexibly.
Quantity to achieve the expansion of the port. The optical fiber splicing disc is also configured for the connection of the upper optical fiber cable and the optical fiber branch, and the adapter for storing the fiber is used for storage and fixation of the upper optical cable.
The box material is made of high quality cold rolled sheet (Q235-A), and the surface of the box is made of epoxy static spray, which has corrosion resistance and aging resistance.
It is effective to integrate the four networks of mobile, Unicom, telecom and radio and television. The construction space and construction strength are greatly saved.
With the design of the left and right structures and the combined structure of the upper and lower structures, there are optical fiber splicing layers on both sides, while the upper right upper layer is the wiring layer of the optical splitter and the lower layer is the fiber splicing layer.
Under the same form and thickness of the chassis, the optical fiber splice tray supports 6 pieces to meet any connection in the construction process.
The part of the plastic part is made of fire-retardant ABS material.
The double layer structure is designed, the upper layer is the optical splitter wiring layer, and the lower layer is the optical fiber fusion layer.
The optical splitter module is designed by drawer module, which has strong interchangeability and versatility.
It adopts flip plate structure to configure ports and light splitting facilities with high density.
It is in line with YD/T 778-2006 "optical fiber and cable sub box" Q/CT 2354-2011, "optical fiber cable box technology requirements".
Product application:
Suitable for use in the FTTH cable to the engineering building, installed in the corridor, basement, room and building facades. Optical fiber cable can also be split through the split wiring box and then fuse with the household cable to achieve the direct connection function of the optical cable to meet the needs of traditional transmission network engineering.
一、产品质量承诺：
1、产品的制造和检测均符合国家标准。
2、产品在有专业检测人员进行检测，确保产品的各项指标达到贵处的要求。
3、我方所提供的产品在质保期内如果存在质量问题，我方愿意承担一切责任。
二、交货期承诺：
我方确保所提供的产品按照需要方要求时间将货物送到*地点，若贵处有特殊要求，需提前完工的，我方可与贵处协商，确保及时满足贵处的需求。
订购说明：
1、全场商品均为不含税价，运输时间按不同区域为3-7天（新疆、港台等较远区域除外）。如需加急运输，请联系特汇客服中心。
2、非常规及定制类商品的交货时间较长，如需加急交货，请联系特汇服中心。
3、产品的技术参数、合格证明、质保证书等资料，随货物一同发出。
4、实际付款A商品，备注发其他商品均为无效，发货以实际付款商品为准。
买家**：
1、特汇严格执行约定的发货时间，如出现延迟到货的情况，我们会提前与您联系。
2、除光缆、网线和定制产品外，在不影响二次销售的情况下，支持用户的退换货需求，让您的购买无后顾之忧。
3、特汇是以会员服务为核心的网站，我们所有线上与线下服务人员以为会员提供更多信息与用心服务为服务宗旨。
售后**
关于退换货：
1、当您收到商品有任何问题需要退回时，请联系我们客服人员；
2、非光缆和网线产品在不影响二次销售的情况下，支持退换货；光缆和网线产品由特汇质检中心检测，出具检测报告确认属于商品质量问题，更换货物，非商品质量问题，双方协商处理。
3、非常规产品不允许退换货。
关于签收：
1、所有商品烦请当面进行验收，如签字确认后出现的破损不能做退换处理。
2、若送货员拒绝验货，请拒绝签收并及时联系我们客服人员为您处理。
3、如果客户不点击签收，则系统在发货后15天自动签收，后3天时会有提示，同时提供一个延长收货的按钮，延长期限3天。
48芯四网合一光纤分纤箱|72芯四网合一光纤分纤箱|96芯四网合一光纤分纤箱|144芯四网合一光纤分纤箱
48芯四网合一光纤配线箱|72芯四网合一光纤配线箱|96芯四网合一光纤配线箱|144芯四网合一光纤配线箱
48芯四网合一光纤楼道箱|72芯四网合一光纤配线箱|96芯四网合一光纤配线箱|144芯四网合一光纤配线箱
48芯四网合一光皮转换箱|72芯四网合一光皮转换箱|96芯四网合一光皮转换箱|144芯四网合一光皮转换箱